Produksi  Bahan Bakar Hasil Proses Pirolisis Sampah Plastik PP dengan Variasi Temperatur Air Pendingin

Rofiq, Khosnor

Dalam rangka peningkatan layanan dan perbaikan sistem, mohon maaf untuk sementara waktu Repositori UNISMA tidak dapat diakses secara optimal.

Show simple item record

dc.contributor.author	Rofiq, Khosnor
dc.date.accessioned	2020-11-25T03:24:27Z
dc.date.available	2020-11-25T03:24:27Z
dc.date.issued	2020-07-06
dc.identifier.uri	http://repository.unisma.ac.id/handle/123456789/574
dc.description.abstract	The problem of environmental pollution is increasingly serious. Household waste is the highest contributor to environmental pollution. Plastic waste is inorganic waste that is difficult to decompose on the ground, burning waste is often done to reduce plastic piles. Burning rubbish also causes air pollution, therefore serious action is needed in dealing with these problems such as recycling waste with the lastik waste pyrolysis method. Pyrolysis is a process of thermal decomposition without involving oxygen, in this way the problem of soil and air pollution by plastic waste will be reduced and the recovery of more useful materials such as liquid fuels is recovered. The pyrolysis process in this study used an experimental method with the effect of variations in the cooling media on the condenser tube to the fuel flowrate. The cooling media used are plain water and water with temperatures below 10 ℃. Interval time used is 30 minutes and 60 minutes. The experimental results show the use of cooling media affects the fuel flowrate. The use of water with a temperature below 10 ℃ as a cooling medium in the condenser tube flowrate produced more than using ordinary water as a cooling medium, because the lower the temperature of the cooling media, the faster the condensation process in the condenser tube. Keywords: plastic waste, polypropylene, pyrolysis, cooling media.	en_US
dc.language.iso	other	en_US
dc.publisher	Universitas Islam Malang	en_US
dc.subject	Sampah Plastik	en_US
dc.subject	Polypropylene	en_US
dc.subject	Pirolisis	en_US
dc.subject	Media Pendingin	en_US
dc.title	Produksi Bahan Bakar Hasil Proses Pirolisis Sampah Plastik PP dengan Variasi Temperatur Air Pendingin	en_US
dc.type	Thesis	en_US